C:\Program Files (x86)\HP\BIOS Configuration Utility>BiosConfigUtility.exe /setvalue:"Virtualization Technology (VT-x)","Enable" /cpwdfile:password.txt <BIOSCONFIG Version="" Computername="PEGASUSZ" Date="2020/09/28" Time="11:18:49" UTC="8"> <SUCCESS msg="Successfully read password from file" /> <SETTING changeStatus="fail" name="Virtualization Technology (VT-x)" returnCode="6"> <OLDVALUE><![CDATA[Disable]]></OLDVALUE> <VALUE><![CDATA[Enable]]></VALUE> </SETTING> <ERROR msg="An operation failed" /> <ERROR msg="BCU return value" real="6" translated="6" /> </BIOSCONFIG>  

Gen1 (2.5Gbps) Gen2 (5Gbps) Slot 3 Error Handling *Enable Disable Slot 4 - PCI Express x8 *Enable Disable Slot 4 Option ROM Download Disable *Enable Slot 4 Limit PCIe Speed *Auto Gen1 (2.5Gbps) Gen2 (5Gbps) Gen3 (8Gbps) Slot 4 Error Handling *Enable Disable Slot 4 Bifurcation *Auto x8 x4x4 Slot 5 - PCI Express x16 *Enable Disable Slot 5 Option ROM Download Disable *Enable Slot 5 Limit PCIe Speed *Auto Gen1 (2.5Gbps) Gen2 (5Gbps) Gen3 (8Gbps) Slot 5 Error Handling *Enable Disable Slot 5 Bifurcation *Auto x8x8 x4x4x4x4 PCI SERR# Generation Disable *Enable Slot 6 - PCI *Enable Disable PCI VGA Palette Snooping *Disable Enable Slot 6 Option ROM Download Disable *Enable PCI Latency Timer 32 PCI Bus Clocks 64 PCI Bus Clocks 96 PCI Bus Clocks *128 PCI Bus Clocks 160 PCI Bus Clocks 192 PCI Bus Clocks 224 PCI Bus Clocks 248 PCI Bus Clocks Slot 6 Error Handling *Enable Disable Save Custom Defaults *Do not Save Save Apply Custom Defaults and Exit *No Yes Apply Factory Defaults and Exit *No Yes Restore Security Settings to Default *Disable Enable

Disable *Enable Idle Power Savings Normal *Extended Unique Blink States Disable *Enable FAN Idle Mode *------ +----- ++---- +++--- ++++-- +++++- ++++++ Power state after power loss Power On *Power Off Previous State S4/S5 Max Power Savings Disable *Enable Enhanced Halt State (C1E) Disable *Enable Front Chassis Fan Min Speed Percentage 0 Rear Chassis Fan Min Speed Percentage 0 Enable CPU HWPM *Disable Autonomous Intel Hyper-Threading Technology *Enable Disable Active CPU Cores Per Processor *All cores per processor One core per processor Two cores per processor Non-Uniform Memory Access (NUMA) Disable *Enable Turbo Mode Disable *Enable QPI Snoop Mode *Early Snoop Home Snoop Cluster On Die Directory With OSB PCIe Performance Mode *Disable Enable Isoc Mode Disable *Enable MMIO Assignment Mode 32 Bit 64 Bit *Auto Slot 1 - PCI Express x1 *Enable Disable Slot 1 Option ROM Download Disable *Enable Slot 1 Limit PCIe Speed *Auto Gen1 (2.5Gbps) Gen2 (5Gbps) Slot 1 Error Handling *Enable Disable Slot 2 - PCI Express x16 *Enable Disable Slot 2 Option ROM Download Disable *Enable Slot 2 Limit PCIe Speed *Auto Gen1 (2.5Gbps) Gen2 (5Gbps) Gen3 (8Gbps) Slot 2 Error Handling *Enable Disable Slot 2 Bifurcation *Auto x8x8 x4x4x4x4 Slot 3 - PCI Express x4 *Enable Disable Slot 3 Option ROM Download Disable *Enable Slot 3 Limit PCIe Speed *Auto

NVMe Write Endurance Masking *Disable Enable Advanced Error Control *Disable Enable Network Controller(AMT) Option ROM Download Disable *Enable SAS Option ROM Disable *Enable Mini OROM Display Disable *Enable Active Management Technology (AMT) Disable *Enable Unconfigure AMT on next boot *Disable Enable Hide Unconfigure ME Confirmation Prompt *Disable Enable ME WatchDog Timer Disable *Enable OS Timer 5 BIOS Timer 5 USB Configure *Disable Enable Platform Event Trap (PET) Progress Disable *Enable Remote Assistance Process *Disable Enable AMT CIRA Timeout 0 Virtualization Technology (VT-x) *Disable Enable Intel VT for Directed I/O (VT-d) *Disable Enable Intel TXT(LT) Support *Disable Enable Password prompt on F9 F11 & F12 Disable *Enable Prompt for Admin password on Capsule Update Disable *Enable Admin Password Present No *Yes Power-On Password Present *No Yes Front USB Ports Disable *Enable Rear USB Ports Disable *Enable Rear USB Port 1 Disable *Enable Rear USB Port 2 Disable *Enable Rear USB Port 3 Disable *Enable Rear USB Port 4 Disable *Enable Rear USB Port 5 Disable *Enable Rear USB Port 6 Disable *Enable Internal USB Ports Disable *Enable Internal USB Port 1 Disable *Enable Internal USB Port 2 Disable *Enable Internal USB Port 3 Disable *Enable Runtime Power Management

Italiano Francais Japanese Portugues Dansk Svenska Nederlands Norsk Suomi Internal Speaker Disable *Enable Headless Boot *Disable Enable Riser Isolation *Disable Enable Azalia HD Audio Disable *Enable NumLock on at boot *Disable Enable Network Controller (AMT) Disable *Enable SATA Controller Mode IDE *AHCI RAID SATA Controller Disable *Enable sSATA Controller Disable *Enable sSATA Controller Mode IDE *AHCI RAID xHCI Controller Disable *Enable Data Execution Prevention Disable *Enable Thunderbolt Mode Legacy Mode *Unique ID One Time Saved Key DP++ Only SATA Port 0 Disable *Enable SATA Port 0 eSATA *Disable Enable SATA Port 1 Disable *Enable SATA Port 1 eSATA *Disable Enable sSATA Port 0 Disable *Enable sSATA Port 0 eSATA *Disable Enable sSATA Port 1 Disable *Enable sSATA Port 1 eSATA *Disable Enable sSATA Port 2 Disable *Enable sSATA Port 2 eSATA *Disable Enable sSATA Port 3 Disable *Enable sSATA Port 3 eSATA *Disable Enable PCIe ACS Disable *Enable Expansion Chassis Compatibility Mode *Disable Enable Early Reset Delay *Disable Enable PCIe Training Reset *Disable Enable

*Inactive Active Update Source *HP Custom Automatically Check for Updates Daily Weekly *Monthly Automatic BIOS Update Setting *Disable Let user decide whether to install updates Install all updates automatically Install only important updates automatically Update Address Force Check on Reboot *Disable Enable Update BIOS via Network Disable *Enable Use Proxy *Disable Enable Proxy Address DNS Configuration *Automatic Manual DNS Addresses Data transfer timeout 100 IPv4 Address IPv4 Configuration *Automatic Manual IPv4 Gateway IPv4 Subnet Mask Force HTTP no-cache *Disable Enable Remote HP PC Hardware Diagnostics Custom Client Upload Url Remote HP PC Hardware Diagnostics Use Custom Download Url *Disable Enable Remote HP PC Hardware Diagnostics Custom Client Download Url Remote HP PC Hardware Diagnostics Scheduled Execution Enabled *Disable Enable Remote HP PC Hardware Diagnostics Scheduled Execution Frequency Daily *Weekly Monthly Remote HP PC Hardware Diagnostics Last Execution Status 0 Remote HP PC Hardware Diagnostics Last Execution Time Stamp Remote HP PC Hardware Diagnostics Upload Server Username Remote HP PC Hardware Diagnostics Upload Server Password Remote HP PC Hardware Diagnostics Is Smtp Url *Disable Enable Remote HP PC Hardware Diagnostics Execute On Next Boot *Disable Enable System Management Command Disable *Enable S5 Wake On LAN Disable Boot to Network *Boot to Hard Drive Select Language *English Deutsch Espanol Italiano Francais Japanese Portugues Dansk Svenska Nederlands Norsk Suomi Simplified Chinese Traditional Chinese Select Keyboard Layout *English Deutsch Espanol

Clear Secure Boot keys *Disable Enable Reset Secure Boot keys to factory defaults *Disable Enable MS UEFI CA key Disable *Enable Ready to disable MS UEFI CA Key Not Ready *Ready Cover Lock *Unlock Lock Cover Removal Sensor *Disable Notify User Setup Password Enter Build ID 14WWZDAD3**#SAB2#DAB2 PXE Internal NIC boot *Disable Enable Factory Recovery Boot Support *Disable Enable Optical Media Boot Support *Disable Enable USB Media Boot Support Disable *Enable POST Delay (in seconds) *Disable 5 Seconds 10 Seconds 15 Seconds 20 Seconds 30 Seconds 40 Seconds 50 Seconds 60 Seconds MRC Fast Path on Cold Boot Disable *Enable Sunday *Disable Enable Monday *Disable Enable Tuesday *Disable Enable Wednesday *Disable Enable Thursday *Disable Enable Friday *Disable Enable Saturday *Disable Enable BIOS Power-On Hour 0 BIOS Power-On Minute 0 Legacy Boot Options Disable *Enable Legacy Boot Order HDD:USB:1 CDROM:SATA:1 HDD:SSATA:1 HDD:SSATA:2 UEFI Boot Options Disable *Enable UEFI Boot Order HDD:SSATA:1 HDD:USB:1 CDROM:SATA:1 Serial Port A Disable *Enable Fast Boot Disable *Enable Configure Option ROM Launch Policy *All Legacy All UEFI All UEFI Except Video Permanent Disable Absolute Persistence Module Set Once *No Yes Absolute Persistence Module Current State

BIOSConfig 1.0 ; ; Originally created by BIOS Configuration Utility ; Version: 4.0.30.1 ; Date="2020/09/25" Time="14:57:24" UTC="8" ; ; Found 217 settings ; Product Name HP Z440 Workstation Processor 1 Type Intel(R) Xeon(R) CPU E5-1620 v3 @ 3.50GHz Processor 1 Speed 3500 MHz Processor 1 Cache Size (L1/L2/L3) 256 KB / 1 MB / 10 MB Processor 1 MicroCode Revision 43 Processor 1 Stepping 2 Processor 1 CPU0-DIMM1 8 GB Hynix Processor 1 CPU0-DIMM2 8 GB Hynix Processor 1 CPU0-DIMM3 8 GB Samsung Processor 1 CPU0-DIMM4 Empty Processor 1 CPU0-DIMM5 Empty Processor 1 CPU0-DIMM6 Empty Processor 1 CPU0-DIMM7 Empty Processor 1 CPU0-DIMM8 Empty Serial Number 6CR607WL9R SKU Number F5W13AV#AB2 Universally Unique Identifier (UUID) 83EACBBCE930E711BB2B40B0CD06D070 Asset Tracking Number Ownership Tag Enter Feature Byte 3Q3Y6E6S6a7N7Q7T7U7W7a7d8J8h8v8w9Y.Bf Memory Size 24 GB ECC RDDR4 / 2133 MHz System Board CT Number Product Family 103C_53335X G=D MS Digital Marker 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 System BIOS Version M60 v02.54 06/12/2020 ME Firmware Version 9.1.45.3000 ME Firmware Mode AMT Boot Block Date 07/02/2014 Reference Code Revision 4.04.00 System Board ID 212B Integrated MAC Address 1 48:0F:CF:62:6C:AA SBRevID 0005 Manufacturing Programming Mode Unlock *Lock Password Minimum Length 8 At least one symbol is required in Administrator and User passwords *No Yes At least one number is required in Administrator and User passwords *No Yes At least one upper case character is required in Administrator and User passwords *No Yes At least one lower case character is required in Administrator and User passwords *No Yes Are spaces allowed in Administrator and User passwords? *No Yes Clear password jumper Ignore *Honor Configure Legacy Support and Secure Boot *Enable Legacy Support and Disable Secure Boot Disable Legacy Support and Enable Secure Boot Disable Legacy Support and Disable Secure Boot