取消
显示结果 
搜索替代 
您的意思是: 

最新主题

问题已经解决了1😀
按照手册里的说明修改了配置文件里的参数,不接显示器怎么鼠标键盘没法操作??这是哪里出问题了吗?  
ZCentral Remote Boost V20.4.0.886 这个版本在哪里能下载到???
ZCentral Remote Boost V20  及以前的版本哪里可以下载?
啥意思?看不懂,你就直接告诉我怎么做
在惠普官网下载的ZCentral-Remote-Boost远程连接软件连接Sender端提示找不到license,说是ZCentral-Remote-Boost免费许可的促销优惠将于1月12023日到期。2023年1月1日后,必须购买HP远程访问软件的当前订阅,以便将来使用此软件版本,这是要购买吗?之前不是可以在HP的Z系列工作站上使用的吗????
请问这个headless mode 在SenderConfigAPP里哪里设置的,没看到相关选项啊
新购的一台 HP Z4G4工作站,安装了ZCentral-Remote-Boost Sender 端远程连接客户端,Reciver端远程连接后,鼠标键盘没法操作,Sender端接上显示器后鼠标键盘才能操作,不接显示器Reciver端鼠标键盘就没法操作。 有个错误提示信息:The Sender is configured to disable the monitor,keyboard and m... 查看更多...
新购的一台 HP Z4G4工作站,安装了ZCentral-Remote-Boost Sender 端远程连接客户端,Reciver端远程连接后,鼠标键盘没法操作,Sender端接上显示器后鼠标键盘才能操作,不接显示器Reciver端鼠标键盘就没法操作。 有个错误提示信息:The Sender is configured to disable the monitor,keyboard and mouse that are physically attached to the Sender system when the desktop is accessed.The sender was unable to successfully apply this setting.    请问Sender端还要设置什么吗?怎么设置呢?
HP 工作站新安装的 ZCentral Remote Boost远程连接软件Sender端安装在HP 工作站上,接收端电脑远程连接不上,提示  The certificate authority cannot be verified because the certifical is self signed       the sender address doesn't match any o... 查看更多...
HP 工作站新安装的 ZCentral Remote Boost远程连接软件Sender端安装在HP 工作站上,接收端电脑远程连接不上,提示  The certificate authority cannot be verified because the certifical is self signed       the sender address doesn't match any of the address on the certificate 用之前的 RGS版本可以连接,升级到新版本软件连接不上,为啥?
重新安装操作系统,重新安装RGS后,在局域网本地远程连接出现卡顿、速度慢、连不上等情况,请问这和预装的系统有关吗
安装了这个驱动好了,触摸板能用了,谢谢!
HP ZBOOK 17 G5移动工作站,触摸板不能用,在BIOS里能移动,驱动也安装了官网上的,触摸板就是不能用,驱动安装了几遍都不行,不知道啥情况????
C盘完好,硬盘也没坏,按F2进去弄一下,重启后又能进系统了,可用了没多久又出现上面的情况。。。。。。。。这是啥情况啊,新电脑啊,没用多久的
经常用着就蓝屏,然后重启,出现如下画面: 移动工作站才买的没多久,经常用着就蓝屏就重启出现这个画面就不动了
你好!路由器上做了端口映射,RGS不是只需42966端口做映射就可以了吗,sender端显示有用户连接进来,而且屏幕黑屏,说明映射端口没问题啊
以下是Sender端系统日志: 10-08-21 15:26:16 INFO - ReceiverDetails::isMatchFound - allowing connection via subnetmasking to IP address 192.168.100.253 10-08-21 15:26:24 INFO - WinSenderSecurityContext::authe... 查看更多...
以下是Sender端系统日志: 10-08-21 15:26:16 INFO - ReceiverDetails::isMatchFound - allowing connection via subnetmasking to IP address 192.168.100.253 10-08-21 15:26:24 INFO - WinSenderSecurityContext::authenticateUserDomainPassword: authentication succeeded! 10-08-21 15:26:24 INFO - SenderSessionManager::getReceiverRgsVersionString - RGS Receiver version: 7.7.0.20876 10-08-21 15:26:25 INFO - FlexLicenseBase::checkoutFeature() for RGS_Preload succeeded 10-08-21 15:26:25 INFO - ModelValidator::validateModel() VENDOR_STRING is ZBook; Z8xx; Z6xx; Z4xx; Z2xx; Z1; 87xxw; 85xxw; 84xxw; HP Z; model is HP Z6 G4 Workstation 10-08-21 15:26:25 INFO - VirtualDisplayHolder::resetVirtualDisplay: create Null virtual display, remove old virtual display 10-08-21 15:26:25 INFO - VirtualDisplayHolder::resetVirtualDisplay: create DesktopDuplication virtual display, remove old virtual display 10-08-21 15:26:25 INFO - VirtualDisplayHolder::handleDisplayTransition - created DesktopDuplication virtual display 10-08-21 15:26:26 INFO - FeatureRegistration::isFeatureRegistered: already registered. 10-08-21 15:26:26 INFO - FeatureRegistration::isFeatureRegistered: already registered. 10-08-21 15:26:50 INFO - VirtualDisplayHolder::resetVirtualDisplay: create Null virtual display, remove old virtual display 10-08-21 15:26:50 INFO - WtsSessionManager::printSessionInfo - Rgsender session ID: 4 Active console session ID: 4 10-08-21 15:26:50 INFO - WtsSessionManager::printSessionInfo - SessionId: 0 WinStationName: Services State: Disconnected Type: Console is Locked: 0 10-08-21 15:26:50 INFO - WtsSessionManager::printSessionInfo - SessionId: 3 WinStationName: State: Disconnected Type: Console is Locked: 0 10-08-21 15:26:50 INFO - WtsSessionManager::printSessionInfo - SessionId: 4 WinStationName: Console State: Active Type: Console is Locked: 1 10-08-21 15:27:04 INFO - WtsSessionManager::printSessionInfo - Rgsender session ID: 4 Active console session ID: 4 10-08-21 15:27:04 INFO - WtsSessionManager::printSessionInfo - SessionId: 0 WinStationName: Services State: Disconnected Type: Console is Locked: 0 10-08-21 15:27:04 INFO - WtsSessionManager::printSessionInfo - SessionId: 3 WinStationName: State: Disconnected Type: Console is Locked: 0 10-08-21 15:27:04 INFO - WtsSessionManager::printSessionInfo - SessionId: 4 WinStationName: Console State: Active Type: Console is Locked: 0     10-08-21 15:26:25 4436(4440) ERROR - RgsenderSvcModule::OnCustomMessage(PrimaryUserLogOn): RGSSvcModule Failed to create RGSSessionInfo 10-08-21 15:26:25 4436(4440) ERROR - RgsenderSvcModule::OnCustomMessage: OpenEvent of SESSIONCONNECTEVENT failed - SessionInfo component not instantiated with error 2 10-08-21 15:26:50 4436(4440) ERROR - RgsenderSvcModule::OnCustomMessage(PrimaryUserLogOff): RGSSvcModule Failed to create RGSSessionInfo 10-08-21 15:26:50 4436(4440) ERROR - OpenEvent of SESSIONDISCONNECTEVENT failed - SessionInfo component not instantiated with error 2 10-08-21 15:26:50 4436(4440) INFO - RgsenderSvcModule::OnControlSessionChange - received WTS_SESSION_LOCK - sessionId=4 10-08-21 15:27:04 4436(4440) INFO - RgsenderSvcModule::OnControlSessionChange - received WTS_SESSION_UNLOCK - sessionId=4 外网连接进来输入账户密码后,sender端会黑屏,但是接收端就是连不上
你好!IP地址是正确的,sender端是安装在HP的工作站上的,在路由器上做了内部端部映射,而且sender端也能看到有用户远程进来的信息,receiver端就是出不来远端画面,然后就弹出一个对话框,意思是连接不到sender
RGS在内网远程连接没有任何问题,现在想在外网通过RGS远程连接,在路由器里做了RGS服务的端口映射,外部通过外部IP连接后,弹出了提示输入账户密码对话框,这说明已经联通了,但是输入正确的账户和密码后,出不来远程桌面画面,sender端有显示有用户连接,接收端就是出不来画面,过一会弹出有个对话框,提示:Unable to connect to sender, 。。。。。。。。。。。
† 惠普支持社区是一个客户交流平台,便于客户找到有效的解决方法,快速解决问题,充分利用惠普产品。请在发帖之前,阅读社区的使用条款注册须知。