![Archived](https://h30471.www3.hp.com/html/@5418FB107661B5C86CB9186AF7932FB1/assets/icon-file-light.png)
此主题已经被归档,里面包含的信息和链接可能会过期或者失效。如果您遇到难题,请点击 这里 发帖,或者点击上面的"发布新帖"按钮并选择相应的版块。
- 将帖子标记为未读
- 将此主题添加到书签
- 订阅此主题
- 禁止
- 订阅此主题的 RSS 提要
- 高亮显示此贴
- 打印此贴
- 标记帖子
已解决!
经典解决方案 : HP LJ3015的问题
发布时间 2004-03-28 07:59:09
最新的3015一体机最早的一批会有这种现象,用分机发送传真时,一页以上的发第2页时会死机,当你的机器不幸有这种现象时,那你中奖了,据说也就几百台有这种故障,你也别急,去经销商那要一个程序,升级一下打印机的固件就象主板刷BIOS似的,就好了,我这里也有!!
已解决! 跳转到解答
1 个已接受解答
已接受的解答
- 将帖子标记为未读
- 将此主题添加到书签
- 订阅此主题
- 禁止
- 订阅此主题的 RSS 提要
- 高亮显示此贴
- 打印此贴
- 标记帖子
已解决!
经典解决方案 : HP LJ3015的问题
发布时间 2004-03-28 08:44:02
10 条回复10
- 将帖子标记为未读
- 将此主题添加到书签
- 订阅此主题
- 禁止
- 订阅此主题的 RSS 提要
- 高亮显示此贴
- 打印此贴
- 标记帖子
已解决!
经典解决方案 : HP LJ3015的问题
发布时间 2004-03-28 08:29:36
第一种情况:
有大约100台3015,用外接电话机拨号时就是无法发传真.由于软件版本的缘故,请用户去维修中心升级软件,或按以下过程自己升级软件.
URL: http://plslab.boi.hp.com/releases/Release.asp?GroupID=1
On this page you will find "Freezes" and "Rom Releases" for each of the BFI products. "Freezes" are created weekly. "Rom Releases" are created when a certain milestone has been reached or for a formal audience (such as Canon, QSI, EMU, or MR).
To update your respective unit:
1) Click on the "Update_Me" link and save the exe to your local hard-drive.
2) Connect the device to your PC (Note: I've always used the parallel port, since USB will require that you have the product driver already installed).
3) Turn on the device and make sure it is in the ready state
4) Run the exe. Exe only has 2 choices (either Okay or Cancel).
5) Let the exe run to completion.
第二种情况:
开机后第一次用外接电话机拨号发传真时,发到2/3时死机.解决办法如下:
请告诉用户LJ3015开机后,如想用外接电话机拨号发传真,第一次发传真必须用3015自己的键盘拨号.我们正在与工厂联系此事,会尽快解决此问题.
有大约100台3015,用外接电话机拨号时就是无法发传真.由于软件版本的缘故,请用户去维修中心升级软件,或按以下过程自己升级软件.
URL: http://plslab.boi.hp.com/releases/Release.asp?GroupID=1
On this page you will find "Freezes" and "Rom Releases" for each of the BFI products. "Freezes" are created weekly. "Rom Releases" are created when a certain milestone has been reached or for a formal audience (such as Canon, QSI, EMU, or MR).
To update your respective unit:
1) Click on the "Update_Me" link and save the exe to your local hard-drive.
2) Connect the device to your PC (Note: I've always used the parallel port, since USB will require that you have the product driver already installed).
3) Turn on the device and make sure it is in the ready state
4) Run the exe. Exe only has 2 choices (either Okay or Cancel).
5) Let the exe run to completion.
第二种情况:
开机后第一次用外接电话机拨号发传真时,发到2/3时死机.解决办法如下:
请告诉用户LJ3015开机后,如想用外接电话机拨号发传真,第一次发传真必须用3015自己的键盘拨号.我们正在与工厂联系此事,会尽快解决此问题.
![Archived](https://h30471.www3.hp.com/html/@5418FB107661B5C86CB9186AF7932FB1/assets/icon-file-light.png)
此主题已经被归档,里面包含的信息和链接可能会过期或者失效。如果您遇到难题,请点击 这里 发帖,或者点击上面的"发布新帖"按钮并选择相应的版块。